Alpha ECG-125 Manual de instrucciones descargar pdf (Pagina 17)

With the slide cover as-

sembly open, the unit can

now be pushed up against

the wall allowing the hous-

ing to ride along the edge.

(See Figure 6: Slide Cover

Assembly Open). With the

slide cover assembly open,

extra care should be taken

toholdtheunitattoprevent

grooving along the wall.

Edgegrindingwillworkbestwithour5”grindingwheel.Thiscongurationallowsyouabout

1mm clearance between the grinding wheel and the wall.

DUST HOSE AND BAG INSTALLATION

1. Installtheback-owpreventer

assembly to the Ecogrinder

exhaust port, with the dust gate

intheuprightposition,soap

will close when the tool is turned

off.

2. Slide the dust hose onto the

backowpreventerassembly,

twist and turn until the hose is

up against the shoulder of the

back-owpreventerassembly.

Dust Gate

Figure-8

Back-Flow Preventer w/Dust Gate

Dust Hose

Back-owPreventer

Assembly Shoulder

Figure-9

Back Flow Preventer Assembly and Dust Hose

Figure-7

Edge Grinding / 1mm Wall Clearance

1mm

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Sin comentarios

Alpha ECG-125 Manual de instrucciones Pagina 17