Alpha ECG-125 Manual de instrucciones descargar pdf (Pagina 32)

INSPECTING AND CLEANING THE FAN BELTS AND PULLEYS

1. With the fan belt removed, you can now check and clean it using a mild detergent.

The fan belt will need to be replaced if it is frayed or showing signs of wear.

2. The pulley should also be cleaned with a mild detergent.

3. Rotate the pulley by hand to check for bearing play and wear.

4. Make sure to fully clean the inside area of the large pulley where the pulley meets the

spindle to prevent slippage.

REINSTALLING THE INNER FAN BELT

1. Reinstallthebottompulleywiththerecessfacingthespindleandhousing(seegure

38).Pressthespindlelockbutton(seegure25)whileinstallingtheangenutand

lock in place.

2. Place the fan belt around the top of the large pulley, guide the other side of the belt

againstthesmallpulleywithyourindexngerwhileturningtheangenut.Aftertwo

or three turns the fan belt should center itself.

3. Reinstalltheinnerfanbeltcoverandatheadscrew.

Figure-37

Figure-38

Cleaning fan belt and pulleys

Clean the dust and

buildup in this recessed

area before reinstalling.

Inner fan belt Installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

Alpha ECG-125 Manual de instrucciones Pagina 32